Mould making silicone 500g
£17.62
£20.72
(You save
£3.11
)
Write a Review
Mould making silicone 500g
Stop Motion mould making silicone.
Based on a formula widely used in the animation industry, this silicone is mixed with 10% catalyst in order for it to cure (curing is 16hrs to 24hrs).
Contents:
500g Silicone mould making kit + 10% Catalyst
Key Characteristics: Pot life 90 – 120 mins Demould – 16 – 24 hrs High elongation and flexibility Good tear strength Easily Pigmented Precise reproduction Low shrinkage
Specific uses include: Precise Mould Making (small scale)
Tips and usage:
Mix 10% catalyst by weight to silicone (best used on digital scales).
Store stop motion mould making silicone and catalyst in a cool dry place away from direct sunlight and or extreme cold. When mixing with catalyst avoid creating air bubbles by folding to blend together. Slowly fold for approx 2mins or until fully blended. Poor silicone into/onto sculpt from a height (approx 30cm – 50cm away from mould) allowing any unwanted air bubbles to escape.
Please note: Buyers shall remain responsible for satisfying one’s self that the silicone products as supplied by Animation Toolkit are suitable for one’s intended purposes. Since we cannot control the application, process or use of this product, we cannot accept responsibility therefore.
Due to international trade restrictions we cannot ship this product abroad without prior application. Please contact us before buying if you intend to ship overseas.
